GREENPAC™ AIR CONDITIONERS

MODELS AVGA

GENERAL DESCRIPTION

The GPac wall mounted air conditioner with gas heat is designed for use on a variety of applications including modular classrooms, relocatable offices and a multitude a permanent buildings. The GPac unit is manufactured in two cabinets with nominal cooling capacities of 2, 2-1/2, 3, 3-1/2, 4, and 5 tons and input heating capacities of 45,000; 67,500; 75,000; 90,000; 100,000 and 125,000 BTUHs.

The Marvair GPac is available with a number of factory and field installed options and accessories that permit the user to optimize the unit for specific applications.

MODEL AVGA:

• EER: 9.0 - 9.6 with 80% Heating Efficiency

• Cooling Capacities: 2, 2-1/2, 3, 3-1/2, 4, and 5 tons and input heating capacities of 45,000; 67,500; 75,000; 90,000; 100,000 and 125,000 BTUHs

SAFETY LISTED AND ENERGY CERTIFIED

All GPac air conditioners are built to the current UL and CAN/CSA standards. The units are listed by ETL and tested to the American National Standard/CSA Standard for Gas Fired Central Furnances; ANSI Z 21.47 -2006/CSA 2.30-2006. For energy efficiency and performance, the units are tested and rated in accordance to the current ANSI/AHRI (Air-Conditioning Heating and Refrigeration Institute) Standard 390 (Single Package Vertical Units). All AVGA units meet or exceed the efficiency requirements of ANSI/ASHRAE/IESNA 90.1.2010. GPac air conditioners are commercial units and are not intended for use in residential applications.

ECONOMICAL GAS HEAT

• Factory set up for natural gas with easy conversion in field to propane

• Natural gas high altitude pressure switch kit allows operation in sites from 6,000 to 10,000 ft. (1,830 m to 3,050 m)

• Propane high altitude pressure switch kit allows operation in sites from 6,000 to 10,000 ft. (1,830 m to 3,050 m)

• Vertical vent pipe kits

EASE OF INSTALLATION

• Sloped top with flashing sheds water eliminates need the need for a rainhood

• Built-in full length mounting flanges facilitate installation and minimizes chance of water leaks

• Electrical knockouts on back and side

• Gas connection on the right hand side

• Factory installed disconnect

BUILT-IN RELIABILITY

• High and low pressure switches with lockout relay protect refrigerant circuit

• Time delay/anti-short cycle timer and low ambient control

PATENTED TUBULAR HEAT EXCHANGER WITH INTEGRAL FORMED DIMPLE TURBULATOR

• Enhanced heat transfer for optimum efficiency

• Quiet – eliminates noise caused by expansion and contraction of internal baffles

PATENTED INSHOT GAS BURNERS

• Quiet, clean burning gas inshot burners fire in a direct line with the orifice and the tube

• Unique carryover design (cross lighting from one burner to another) for immediate lighting

• Optional stainless steel burner

DIRECT SPARK IGNITION CONTROL SYSTEM WITH LED FLASH FAULT INDICATOR

• Thirty second purge of heat exchanger prior to ignition

• Three ignition trials before lockout

• Sixty second post purge at end of operating cycle prevents nusaince trips of rollout switch

• One hour automatic reset after lockout – eliminates need to manually recycle on lockout

• LED identifies operating status and simplifies service by flashing fault code

EASE OF SERVICE

• Compressor and electrical box are easily accessible

• Refrigerant access values allow quick check of refrigerant pressures

• Easily accessible filter

• LED identifies operating status and simplifies service by flashing fault code in heating mode

• Copper tube, aluminum fin evaporator and condenser coils

For detailed specifications, performance, and efficiency information, download the Product Data Sheet from the document list on this page.